Medium duty (TG) with 2K handle
Product details
- 2K composite handle with comfort insert
- Profiled rail is extremely rigid
- Standard pads are field replaceable
- Malleable cast jaws feature corrugated design for strength and durability
| Order number | Clamping capacity | Throat depth | Clamping force | Approx. weight |
| inches | inches | lbs | lbs | |
|---|---|---|---|---|
|
TG4.512+2K
|
12 | 4 1/2 | 1000 | 3.58 |
|
TG4.518+2K
|
18 | 4 1/2 | 1000 | 4.43 |
|
TG4.524+2K
|
24 | 4 1/2 | 1000 | 4.7 |
|
TG4.530+2K
|
30 | 4 1/2 | 1000 | 5.42 |
|
TG4.540+2K
|
40 | 4 1/2 | 1000 | 6.25 |
|
TG5.512+2K
|
12 | 5 1/2 | 1320 | 4.84 |
|
TG5.518+2K
|
18 | 5 1/2 | 1320 | 5.95 |
|
TG5.524+2K
|
24 | 5 1/2 | 1320 | 6.28 |
|
TG7.016+2K
|
16 | 7 | 1320 | 5.96 |
|
TG7.024+2K
|
24 | 7 | 1320 | 7.04 |
|
TG7.048+2K
|
48 | 7 | 1320 | 9.48 |
- Interior fittings
- Shell construction
- DIY
- Furniture and joinery works
- Kitchen construction and shop fitting
- Carpentry and woodwork
- Powerful and rigid clamping
- Clamping tools are not suitable for lifting, pulling or transporting.
- Clamping tools may only be clamped manually without using any auxiliary tools.
- Improper use can cause personal injuries or material damage.
- Never change or modify clamping tools. Only use them in their original condition. Only use original‐spare parts if required.
- Upper and lower section made of reinforced malleable cast iron, powder-coated
- Hollow profile rail made of steel, cold-drawn, galvanised
- Spindle with trapezoidal thread in rolled steel, burnished
- Handle made of 2-component plastic
- Pressure plate made of steel, cold pressed, galvanised
- Protective caps made of plastic
- Regular maintenance is necessary - only then can a secure hold be guaranteed (no slipping of the sliding bracket)
- Clean the rails with solvent
- Always keep the rail free of grease, oil or dried glue, waxes and silicone-based release agents
- Clean the fluting on the rails with a steel brush
- Clean and oil the spindle regularly
- If the lower part slips, turn the grub screw a 1/4 turn further (TG, KRE, KREV only)
- Clean and oil the pressure plate regularly
