Malleable cast, ground clamp
Product details
- With malleable cast iron arms
- Tommy bar with rounded ends for simple transfer of force when clamping
- Grounding connection hole in the upper part
= Show Spareparts
| Order number | Clamping capacity | Throat depth | Volt/Amps | Approx. weight |
| inches | inches | A | lbs | |
|---|---|---|---|---|
|
TP-1K
|
6 | 3 1/8 | 400 | 1.65 |
- Metal construction
- Locksmith work
- Car body construction
- Earthing using ground clamps
- Use the product only in its original condition.
- Use the product only for its intended purpose. Improper use can cause personal injury or property damage.
- Wear safety goggles to protect your eyes.
- Wear protective gloves to protect your hands.
- Wear safety footwear to protect your feet.
- The handle must always be free of oil and grease to prevent slipping.
- Keep the product out of reach of children.
- Small parts must not be swallowed or inserted into body openings.
- Check the product for damage before each use and make sure that all moving parts are working properly.
- A damaged product must not be used.
- Follow the care instructions for each product – see www.bessey.de.
- Use only original BESSEY spare parts.
- The Clamping tool must not be used for lifting, pulling or leaning.
- The clamping tool must not be used to secure cargo during transportation.
- The clamping tool may only be tightened by hand without any additional aids.
- The clamping tool must not be used for permanent installation.
- Regularly check that the end stop is working properly when using clamps.
- Lower section made of zinc die-cast, galvanised
- Cold-drawn, galvanized steel rail with precision profile design for added strength and stability
- Steel T-bar handle delivers strength and reliable operation for tough tasks
- Heat treated ACME threaded spindle ensures smooth adjustments and high wear resistance
- Drop forged steel sliding arm resists wear, providing consistent performance under heavy use
- Regular maintenance is essential to ensure a secure hold and prevent the sliding arm from slipping.
- Clean the rails using a suitable solvent to remove dirt and debris.
- Keep the rail free of contaminants such as grease, oil, dried glue, wax, and silicone-based release agents, as these can affect performance.
- Use a steel brush to clean the rails for optimal grip.
- Clean and oil the spindle regularly.
- If the lower part slips, turn the grub screw a 1/4 turn further (TG, KRE, KREV only).
- Clean and oil the pressure plate regularly.