LMU, light duty, step over
Product details
- Small and very handy
- Light weight
- Comes with two plastic pressure caps
- Helps to clamp in hard to reach spots
= Show Spareparts
| Order number | Clamping capacity | Throat depth | Clamping force | Approx. weight |
| inches | inches | lbs | lbs | |
|---|---|---|---|---|
|
LMU2.004
|
4 | 2 | 330 | 0.51 |
|
LMU2.006
|
6 | 2 | 330 | 0.59 |
|
LMU2.008
|
8 | 2 | 330 | 0.65 |
- Furniture and joinery works
- Kitchen construction and shop fitting
- Interior fittings
- DIY
- Rapid, gentle clamping
- Use the product only in its original condition.
- Use the product only for its intended purpose. Improper use can cause personal injury or property damage.
- Wear safety goggles to protect your eyes.
- Wear protective gloves to protect your hands.
- Wear safety footwear to protect your feet.
- The handle must always be free of oil and grease to prevent slipping.
- Keep the product out of reach of children.
- Small parts must not be swallowed or inserted into body openings.
- Check the product for damage before each use and make sure that all moving parts are working properly.
- A damaged product must not be used.
- Follow the care instructions for each product – see www.bessey.de.
- Use only original BESSEY spare parts.
- The Clamping tool must not be used for lifting, pulling or leaning.
- The clamping tool must not be used to secure cargo during transportation.
- The clamping tool may only be tightened by hand without any additional aids.
- The clamping tool must not be used for permanent installation.
- Regularly check that the end stop is working properly when using clamps.
- Lower section made of zinc die-cast, galvanised
- Rail made of galvanised steel
- Spindle with trapezoidal thread in rolled steel, galvanised
- Handle made of wood, water-based paint
- Drop forged steel sliding arm resists wear, providing consistent performance under heavy use
- Plastic protective cap helps prevent surface damage during use
- Regular maintenance is essential to ensure a secure hold and prevent the sliding arm from slipping.
- Clean the rails using a suitable solvent to remove dirt and debris.
- Keep the rail free of contaminants such as grease, oil, dried glue, wax, and silicone-based release agents, as these can affect performance.
- Use a steel brush to clean the rails for optimal grip.
- Clean and oil the spindle regularly.
- Clean and oil the pressure plate regularly.