STC‑Set for MFT Tables
Product details
- For using the BESSEY toggle clamps on multifunction tables such as Festool MFT and Sortimo WorkMo with hole diameter of 20 mm and plate thickness of min. 19 mm to max. 25 mm
= Show Spareparts
| Order number | Suitable for | Includes | Approx. weight |
| Article | lbs | ||
|---|---|---|---|
|
STC-SET-T20
|
STC-HH50 / STC-HH70 / STC-IHH25 / STC-VH50 | 1 x Cylindrical screw DIN 912 M 8 x 35 / 1 x Lock pin D 20 x 17 / 1 x Knurled nut M 8 | 0.2 |
- Furniture and joinery works
- Interior fittings
- DIY
- For use on multifunctional tables
- Secure quickly with self-adjusting clamping width
- Use the product only in its original condition.
- Use the product only for its intended purpose. Improper use can cause personal injury or property damage.
- Wear safety goggles to protect your eyes.
- Wear protective gloves to protect your hands.
- Wear safety footwear to protect your feet.
- The handle must always be free of oil and grease to prevent slipping.
- Keep the product out of reach of children.
- Small parts must not be swallowed or inserted into body openings.
- Check the product for damage before each use and make sure that all moving parts are working properly.
- A damaged product must not be used.
- Follow the care instructions for each product – see www.bessey.de.
- Use only original BESSEY spare parts.
- The Clamping tool must not be used for lifting, pulling or leaning.
- The clamping tool must not be used to secure cargo during transportation.
- The clamping tool may only be tightened by hand without any additional aids.
- The clamping tool must not be used for permanent installation.
- Regularly check that the end stop is working properly when using clamps.
- Clean the rails using a suitable solvent to remove dirt and debris.
- Clean and oil the spindle regularly.