Track/table clamp (GTR)
Product details
- Specially forged fixed arm for 12 x 8 mm grooves
- For secure fastening of guide rails from Festool, Protool, Metabo, Makita, Hitachi, etc. and for clamping in profiles as well as work tables
- Clamping force up to 400 lbs
- Ergonomically shaped wooden handle
| Order number | Clamping capacity | Throat depth | Clamping force | Approx. weight |
| inches | inches | lbs | lbs | |
|---|---|---|---|---|
|
GTR12
|
4 11/16 | 2 5/16 | 400 | 0.66 |
|
GTR16B6
|
6 5/16 | 2 5/16 | 400 | 0.7 |
|
GTR30B6
|
11 13/16 | 2 5/16 | 400 | 0.88 |
- Interior fittings
- DIY
- Furniture and joinery works
- Kitchen construction and shop fitting
- Secure guide rails and clamp in profiles
- Clamping tools are not suitable for lifting, pulling or transporting.
- Clamping tools may only be clamped manually without using any auxiliary tools.
- Improper use can cause personal injuries or material damage.
- Never change or modify clamping tools. Only use them in their original condition. Only use original‐spare parts if required.
- Fixed and sliding bracket made of tempered steel, galvanised
- Spindle with trapezoidal thread in rolled steel, burnished
- Handle made of wood, water-based paint
- Pressure plate made of steel, cold pressed, galvanised
- Regular maintenance is necessary - only then can a secure hold be guaranteed (no slipping of the sliding bracket)
- Clean the rails with solvent
- Always keep the rail free of grease, oil or dried glue, waxes and silicone-based release agents
- Clean and oil the spindle regularly
- If the rail is shiny, roughen both narrow sides with emery cloth (100 grain)
- Clean and oil the pressure plate regularly