Clutch style bar clamps (enhanced), TGC series
Product details
- BESSEY TGC Series enhanced clutch style bar clamps feature a new, modern design profile with an optimized geometrical shape for extra clamping strength
- Heavier, wider, and thicker bar stock combined with a heavy-duty black oxide coated ACME screw delivers stronger clamping potential and long-lasting durability
- Rated at 700 lbs of clamping force, these clamps are 15% stronger than the 600 lb industry standard
- Powder-coated cast-iron fixed and sliding jaws feature an enhanced shape and robust casting for added strength and durability
- Available with an ergonomic wooden handle or a 2K comfort grip for reduced hand fatigue
- The black oxide coated heavy-duty ACME screw allows for faster, smoother, and more wear-resistant clamping action
- Perfect for woodworking, cabinetry, furniture assembly, and general shop use
- TCG series is available in 6-inch, 12-inch, 24-inch, and 36-inch sizes
= Show Spareparts
| Order number | Clamping capacity | Throat depth | Clamping force | Approx. weight |
| inches | inches | lbs | lbs | |
|---|---|---|---|---|
|
TGC2.506
|
6 | 2 1/2 | 700 | 1.52 |
|
TGC2.512
|
12 | 2 1/2 | 700 | 1.81 |
|
TGC2.524
|
24 | 2 1/2 | 700 | 2.44 |
|
TGC2.536
|
36 | 2 1/2 | 700 | 3.04 |
|
TGC3.506+2K
|
6 | 3 1/4 | 1300 | 2.66 |
|
TGC3.512+2K
|
12 | 3 1/4 | 1300 | 3.16 |
|
TGC3.524+2K
|
24 | 3 1/4 | 1300 | 4.17 |
|
TGC3.536+2K
|
36 | 3 1/4 | 1300 | 4.98 |
New and modern design profile
A new optimized geometrical shape was created to support extra clamping force.
Stronger rail
Heavier, wider, and thicker bar stock with heavyduty black oxide coated ACME screw offers stronger clamp potential.
Clamping force
Rated at 700 lbs. of clamping force versus 600 lb. industry standard – 15% stronger.
Heavy duty cast jaws
Heavier, more durable powder coated cast-iron fixed and sliding jaws.
- Furniture and joinery works
- Carpentry and woodwork
- DIY
- General shop use
- Light assembly work
- Temporary holding
- Use the product only in its original condition.
- Use the product only for its intended purpose. Improper use can cause personal injury or property damage.
- Wear safety goggles to protect your eyes.
- Wear protective gloves to protect your hands.
- Wear safety footwear to protect your feet.
- The handle must always be free of oil and grease to prevent slipping.
- Keep the product out of reach of children.
- Small parts must not be swallowed or inserted into body openings.
- Check the product for damage before each use and make sure that all moving parts are working properly.
- A damaged product must not be used.
- Follow the care instructions for each product – see www.bessey.de.
- Use only original BESSEY spare parts.
- The Clamping tool must not be used for lifting, pulling or leaning.
- The clamping tool must not be used to secure cargo during transportation.
- The clamping tool may only be tightened by hand without any additional aids.
- The clamping tool must not be used for permanent installation.
- Regularly check that the end stop is working properly when using clamps.
- Fixed and sliding jaws made of durable cast iron with a powder-coated finish
- Rail made of nickel-plated, drawn, and serrated steel for strength and safety
- Two-piece slip-clutch plates made of metal to keep jaws secure
- Non-marring plastic pads on top and bottom jaws for added work protection
- Handles made of solid wood for a traditional, ergonomic grip
- Regular maintenance is essential to ensure a secure hold and prevent the sliding arm from slipping.
- Clean the rails using a suitable solvent to remove dirt and debris.
- Keep the rail free of contaminants such as grease, oil, dried glue, wax, and silicone-based release agents, as these can affect performance.
- Use a steel brush to clean the rails for optimal grip.
- Regularly clean and oil the spindle to maintain smooth operation and prevent wear.