Clamping element with gripping arm TW28GRS
Product details
- Fits 28 mm matrix welding tables
- The spindle is located on the outside for free access to the work area and to protect against welding spatter
- Special, sturdy V-grooved pressure plate, ideal even for clamping round or square workpieces
- Particularly suited to clamping with tight of space constraints
- NOTE: Clamping force is based on a calculated height of 2-3 IN and on a solid steel welding table platform
| Order number | Bolt | Clamping capacity | Throat depth | Rail profile | Clamping force | Approx. weight |
| mm | inches | inches | inches | lbs | lbs | |
|---|---|---|---|---|---|---|
|
TW28GRS30-12
|
Ø28 | 12 | 4 3/4 | 1 1/8 x 7/16 | 1000 | 4.98 |
- Metal construction
- Locksmith work
- Self-welding from the specialists in clamping tools
- Clamping tools are not suitable for lifting, pulling or transporting.
- Clamping tools may only be clamped manually without using any auxiliary tools.
- Improper use can cause personal injuries or material damage.
- Never change or modify clamping tools. Only use them in their original condition. Only use original‐spare parts if required.
- Rail and sliding bracket made of tempered steel, galvanised
- Spindle with trapezoidal thread in rolled steel, burnished
- Toggle made of steel, galvanised
- Pressure plate made of steel, phosphated
- Regular maintenance is necessary - only then can a secure hold be guaranteed (no slipping of the sliding bracket)
- Clean the rails with solvent
- Always keep the rail free of grease, oil or dried glue, waxes and silicone-based release agents
- Clean and oil the spindle regularly
- If the rail is shiny, roughen both narrow sides with emery cloth (100 grain)
- Clean and oil the pressure plate regularly (not with lever version)
- Clean and oil the pawl regularly (lever version only)