classiX ® Light duty, GS series

The classiX light duty GS series features a classic, heat treated, tempered steel rail that resists flexing, ensuring reliable and consistent clamping performance
Offers field replaceable standard contact pad for easy maintenance and extended tool life
Delivers nominal clamping forces ranging from 550 lbs to 1200 lbs and throat depths varying by model
Constructed with a sliding steel pin handle and hardened ACME threaded spindle for durability and efficiency

Technical data

= Spare parts available

	inches	inches	lbs	lbs
Order number	Clamping capacity	Throat depth	Clamping force	Approx. weight
GS12-8K	4	3 1/8	550	0.88
GS16K	6	3 1/8	550	1.01
GS20K	8	4	880	1.83
GS16-12K	6	4 3/4	1000	1.01
GS25K	10	4 3/4	1000	2.65
GS30K	12	5 1/2	1200	3.95
GS60K	24	4 3/4	1200	5.22

Areas of application

Safety information

Use the product only in its original condition.
Use the product only for its intended purpose. Improper use can cause personal injury or property damage.
Wear safety goggles to protect your eyes.
Wear protective gloves to protect your hands.
Wear safety footwear to protect your feet.
The handle must always be free of oil and grease to prevent slipping.
Keep the product out of reach of children.
Small parts must not be swallowed or inserted into body openings.
Check the product for damage before each use and make sure that all moving parts are working properly.
A damaged product must not be used.
Follow the care instructions for each product – see www.bessey.de.
Use only original BESSEY spare parts.
The Clamping tool must not be used for lifting, pulling or leaning.
The clamping tool must not be used to secure cargo during transportation.
The clamping tool may only be tightened by hand without any additional aids.
The clamping tool must not be used for permanent installation.
Regularly check that the end stop is working properly when using clamps.

Material/Finish

High quality steel rail ensures durability, stability, and a corrosion resistant finish for long-lasting performance
Steel T-bar handle delivers strength and reliable operation for tough tasks
Heat treated ACME threaded spindle ensures smooth adjustments and high wear resistance
Drop forged steel sliding arm resists wear, providing consistent performance under heavy use

Care instructions

Regular maintenance is essential to ensure a secure hold and prevent the sliding arm from slipping.
Clean the rails using a suitable solvent to remove dirt and debris.
Keep the rail free of contaminants such as grease, oil, dried glue, wax, and silicone-based release agents, as these can affect performance.
Use a steel brush to clean the rails for optimal grip.
Clean and oil the pressure plate regularly.
Regularly clean and oil the spindle to maintain smooth operation and prevent wear.