Trigger clamps, one‑hand bar clamps with 360° rotating handle, EHKL360
Product details
- This innovative patent-pending clamp allows the handle to rotate 360° around the rail.
- The ability to optimize the handle position for clamping (or spreading) improves both clamping ergonomics and tool versatility by allowing one to position the handle optimally for each job.
- Additionally, one can clamp several EHKL360 clamps side-by-side in a confined space and rotate the handle 180° out of the way to allow room for the next clamp.
| Order number | Clamping capacity | Throat depth | Spreading capacity | Clamping force | Approx. weight |
| inches | inches | inches | lbs | lbs | |
|---|---|---|---|---|---|
|
EHKL360-06
|
6 | 3 1/8 | 7 3/4 - 12 1/4 | 300 | 1.79 |
|
EHKL360-12
|
12 | 3 1/8 | 7 3/4 - 18 1/4 | 300 | 2.04 |
|
EHKL360-18
|
18 | 3 1/8 | 7 3/4 - 24 | 300 | 2.21 |
|
EHKL360-24
|
24 | 3 1/8 | 7 3/4 - 30 | 300 | 2.41 |
|
EHKL360-36
|
36 | 3 1/8 | 7 3/4 - 41 3/4 | 300 | 2.79 |
|
EHKL360-12-SET
|
Versatile rotating handle
The patent-pending mechanism allows the adjustable handle to rotate 360° around the rail to optimize ergonomics and versatility.
Clamping in tight spaces
The adjustable handle allows clamping of several clamps side by side in a confined space.
Large clamping surface
Clamping force is distributed evenly. Work is protected by the soft touch removable pads.
Ergonomic composite handle
Ergonomically shaped composite handle with trigger makes it easy to achieve maximum clamping force with enhanced comfort.
- Interior fittings
- DIY
- Furniture and joinery works
- Kitchen construction and shop fitting
- Dry construction
- Staircase construction
- One-handed clamping and spreading
- Clamping tools are not suitable for lifting, pulling or transporting.
- Clamping tools may only be clamped manually without using any auxiliary tools.
- Improper use can cause personal injuries or material damage.
- Never change or modify clamping tools. Only use them in their original condition. Only use original‐spare parts if required.
- Upper and lower section made of reinforced PA6 plastic
- Rail made of hardened steel, burnished
- Lever made of reinforced PA6 plastic
- Protective caps made of plastic
- Regular maintenance is necessary - only then can a secure hold be guaranteed (no slipping of the sliding bracket)
- Clean the rails with solvent
- Always keep the rail free of grease, oil or dried glue, waxes and silicone-based release agents
