Trigger Clamps, EHK series

Product details
  • Quick-release trigger enables fast setup and easy adjustment
  • One-handed operation makes clamping and spreading quick and convenient
  • Converts from clamping to spreading with a quick push of a button—no tools needed
  • Provides clamping force from 85 lbs up to 600 lbs for strong, dependable hold
  • Available in a range of sizes from 4.5 in to 50 in for a wide variety of applications
  • Soft-touch jaw pads protect work surfaces and prevent marring
  • Ergonomic two-part composite handle ensures comfort and control during use
wood plastic sensitive materials
Brochure Download
spareparts = Spare parts available
Order number Clamping capacity Throat depth Spreading capacity Clamping force Approx. weight
inches inches inches lbs lbs
EHKMICRO
4 1/2 1 5/8 3 - 7 3/8 40 0.13
EHKMICRO-2PK
5.97
EHKM06 spareparts
6 2 3/8 4 3/4 - 10 1/2 100 0.69
EHKM06-2PK
1.76
EHKM12 spareparts
12 2 3/8 4 3/4 - 16 1/2 100 0.84
EHKM12-2PK
1.76
EHKL06 spareparts
6 3 1/8 6 1/4 - 11 3/4 300 1.27
EHKL12 spareparts
12 3 1/8 6 1/4 - 17 3/4 300 1.49
EHKL18 spareparts
18 3 1/8 6 1/4 - 23 1/2 300 1.7
EHKL24 spareparts
24 3 1/8 6 1/4 - 29 1/2 300 1.9
EHKL36 spareparts
36 3 1/8 6 1/4 - 41 1/2 300 2.32
EHKXL06 spareparts
6 3 5/8 7 1/2 - 12 1/4 600 2.37
EHKXL12 spareparts
12 3 5/8 7 1/2 - 19 1/4 600 2.74
EHKXL18 spareparts
18 3 5/8 7 1/2 - 24 1/4 600 3.1
EHKXL24 spareparts
24 3 5/8 7 1/2 - 31 1/8 600 3.46
EHKXL36 spareparts
36 3 5/8 7 1/2 - 42 3/4 600 4.18
EHKXL50 spareparts
50 3 5/8 7 1/2 - 56 1/4 600 5.07
  • Furniture and joinery works
  • Carpentry and woodwork
  • Dry construction
  • DIY
  • One-handed clamping and spreading
  • Holding materials for cutting, drilling and sanding
  • Glue-ups and panel assembly
  • Installing trim, molding and fixtures
  • Use the product only in its original condition.
  • Use the product only for its intended purpose. Improper use can cause personal injury or property damage.
  • Wear safety goggles to protect your eyes.
  • Wear protective gloves to protect your hands.
  • Wear safety footwear to protect your feet.
  • The handle must always be free of oil and grease to prevent slipping.
  • Keep the product out of reach of children.
  • Small parts must not be swallowed or inserted into body openings.
  • Check the product for damage before each use and make sure that all moving parts are working properly.
  • A damaged product must not be used.
  • Follow the care instructions for each product – see www.bessey.de.
  • Use only original BESSEY spare parts.
  • The Clamping tool must not be used for lifting, pulling or leaning.
  • The clamping tool must not be used to secure cargo during transportation.
  • The clamping tool may only be tightened by hand without any additional aids.
  • The clamping tool must not be used for permanent installation.
  • Regularly check that the end stop is working properly when using clamps.
  • Upper and lower section made of reinforced PA6 plastic
  • Rail made of hardened steel, burnished
  • Lever made of reinforced PA6 plastic
  • Plastic protective cap helps prevent surface damage during use
  • Regular maintenance is essential to ensure a secure hold and prevent the sliding arm from slipping.
  • Clean the rails using a suitable solvent to remove dirt and debris.
  • Keep the rail free of contaminants such as grease, oil, dried glue, wax, and silicone-based release agents, as these can affect performance.

Product video Trigger Clamps, EHK series

Back to product overview