PG, heavy duty one hand clamp
Product details
- Easy slide button for positioning
- Pump handle to clamp with 100-200 lbs pressure
- Handle/Spindle combo. For heavy tightening.
- 3101402 PG Pad Clamp Set
= Spare parts available
| Order number | Clamping capacity | Throat depth | Clamping force | Approx. weight |
| inches | inches | lbs | lbs | |
|---|---|---|---|---|
|
PG12
|
12 | 4 | 1000 | 2.9 |
|
PG24
|
24 | 4 | 1000 | 3.85 |
- Furniture and joinery works
- Kitchen construction and shop fitting
- Staircase construction
- Interior fittings
- Dry construction
- DIY
- One-handed clamping
- Use the product only in its original condition.
- Use the product only for its intended purpose. Improper use can cause personal injury or property damage.
- Wear safety goggles to protect your eyes.
- Wear protective gloves to protect your hands.
- Wear safety footwear to protect your feet.
- The handle must always be free of oil and grease to prevent slipping.
- Keep the product out of reach of children.
- Small parts must not be swallowed or inserted into body openings.
- Check the product for damage before each use and make sure that all moving parts are working properly.
- A damaged product must not be used.
- Follow the care instructions for each product – see www.bessey.de.
- Use only original BESSEY spare parts.
- The Clamping tool must not be used for lifting, pulling or leaning.
- The clamping tool must not be used to secure cargo during transportation.
- The clamping tool may only be tightened by hand without any additional aids.
- The clamping tool must not be used for permanent installation.
- Regularly check that the end stop is working properly when using clamps.
- High quality steel rail ensures durability, stability, and a corrosion resistant finish for long-lasting performance
- Upper and lower section made of reinforced PA6 plastic
- Steel T-bar handle delivers strength and reliable operation for tough tasks
- Ergonomic 2K composite handle for enhanced grip and comfort during extended use
- Drop forged steel sliding arm resists wear, providing consistent performance under heavy use
- Plastic protective cap helps prevent surface damage during use
- Regular maintenance is essential to ensure a secure hold and prevent the sliding arm from slipping.
- Clean the rails using a suitable solvent to remove dirt and debris.
- Keep the rail free of contaminants such as grease, oil, dried glue, wax, and silicone-based release agents, as these can affect performance.
- Clean and oil the spindle regularly.
- Clean and oil the pressure plate regularly.
- Regularly clean and oil the spindle to maintain smooth operation and prevent wear.
