EZS Clamps
Product details
- Clamping force up to 445 lbs
- No tools required for conversion to spreading
- Available in sizes from 6 In to 36 In
= Show Spareparts
| Order number | Clamping capacity | Throat depth | Spreading capacity | Clamping force | Approx. weight |
| inches | inches | inches | lbs | lbs | |
|---|---|---|---|---|---|
|
EZS15-8
|
6 | 3 1/2 | 6 1/2 - 14 | 445 | 1.59 |
|
EZS30-8
|
12 | 3 1/2 | 6 1/2 - 20 | 445 | 1.83 |
|
EZS45-8
|
18 | 3 1/2 | 6 1/2 - 25 3/4 | 445 | 2.05 |
|
EZS60-8
|
24 | 3 1/2 | 6 1/2 - 31 3/4 | 445 | 2.29 |
|
EZS90-8
|
36 | 3 1/2 | 6 1/2 - 43 1/2 | 445 | 7.77 |
- Furniture and joinery works
- Kitchen construction and shop fitting
- Staircase construction
- Interior fittings
- Dry construction
- DIY
- One-handed clamping and spreading
- Use the product only in its original condition.
- Use the product only for its intended purpose. Improper use can cause personal injury or property damage.
- Wear safety goggles to protect your eyes.
- Wear protective gloves to protect your hands.
- Wear safety footwear to protect your feet.
- The handle must always be free of oil and grease to prevent slipping.
- Keep the product out of reach of children.
- Small parts must not be swallowed or inserted into body openings.
- Check the product for damage before each use and make sure that all moving parts are working properly.
- A damaged product must not be used.
- Follow the care instructions for each product – see www.bessey.de.
- Use only original BESSEY spare parts.
- The Clamping tool must not be used for lifting, pulling or leaning.
- The clamping tool must not be used to secure cargo during transportation.
- The clamping tool may only be tightened by hand without any additional aids.
- The clamping tool must not be used for permanent installation.
- Regularly check that the end stop is working properly when using clamps.
- Upper and lower section made of reinforced PA6 plastic
- Rail made of hardened steel, burnished
- Lever made of reinforced PA6 plastic
- Plastic protective cap helps prevent surface damage during use
- Regular maintenance is essential to ensure a secure hold and prevent the sliding arm from slipping.
- Clean the rails using a suitable solvent to remove dirt and debris.
- Keep the rail free of contaminants such as grease, oil, dried glue, wax, and silicone-based release agents, as these can affect performance.
