Clamping element with fixed throat depth TW
Product details
- Fits 16 mm and 28 mm matrix welding tables
- Fixed throat depth
- Choice of handle styles: T-Bar, Lever or Composite grip handle
- NOTE: Clamping force is based on a calculated height of 2-3 IN and on a solid steel welding table platform
= Show Spareparts
| Order number | Bolt | Clamping capacity | Throat depth | Description | Rail profile | Clamping force | Approx. weight |
| mm | inches | inches | inches | lbs | lbs | ||
|---|---|---|---|---|---|---|---|
|
TW16-20-10-2K
|
16 | 8 | 4 | 2K handle | 7/8 x 3/8 | 650 | 2.05 |
|
TW16-20-10K
|
16 | 8 | 4 | Tommy bar | 7/8 x 3/8 | 650 | 1.9 |
|
TW16-20-10H
|
16 | 8 | 4 | Lever handle | 7/8 x 3/8 | 650 | 2.23 |
|
TW28-30-12-2K
|
28 | 12 | 4 3/4 | 2K handle | 1 1/8 x 7/16 | 1000 | 3.7 |
|
TW28-30-14-2K
|
28 | 12 | 5 1/2 | 2K handle | 1 1/8 x 7/16 | 1100 | 3.75 |
|
TW28-30-12K
|
28 | 12 | 4 3/4 | Tommy bar | 1 1/8 x 7/16 | 1000 | 3.57 |
|
TW28-30-14K
|
28 | 12 | 5 1/2 | Tommy bar | 1 1/8 x 7/16 | 1100 | 3.64 |
|
TW28-30-12H
|
28 | 12 | 4 3/4 | Lever handle | 1 1/8 x 7/16 | 1000 | 4.55 |
|
TW28-30-14H
|
28 | 12 | 5 1/2 | Lever handle | 1 1/8 x 7/16 | 1100 | 4.58 |
- Metal construction
- Locksmith work
- Self-welding from the specialists in clamping tools
- Use the product only in its original condition.
- Use the product only for its intended purpose. Improper use can cause personal injury or property damage.
- Wear safety goggles to protect your eyes.
- Wear protective gloves to protect your hands.
- Wear safety footwear to protect your feet.
- The handle must always be free of oil and grease to prevent slipping.
- Keep the product out of reach of children.
- Small parts must not be swallowed or inserted into body openings.
- Check the product for damage before each use and make sure that all moving parts are working properly.
- A damaged product must not be used.
- Follow the care instructions for each product – see www.bessey.de.
- Use only original BESSEY spare parts.
- The Clamping tool must not be used for lifting, pulling or leaning.
- The clamping tool must not be used to secure cargo during transportation.
- The clamping tool may only be tightened by hand without any additional aids.
- The clamping tool must not be used for permanent installation.
- Regularly check that the end stop is working properly when using clamps.
- Rail and sliding bracket made of tempered steel, galvanised
- Spindle with trapezoidal thread in tempered, rolled steel, phosphated
- Ergonomic 2K composite handle for enhanced grip and comfort during extended use
- Handle made of wood, water-based paint
- Heat treated ACME threaded spindle ensures smooth adjustments and high wear resistance
- Pressure plate made of steel, phosphated
- Connecting elements made of steel, galvanised or phosphated
- Regular maintenance is essential to ensure a secure hold and prevent the sliding arm from slipping.
- Clean the rails using a suitable solvent to remove dirt and debris.
- Keep the rail free of contaminants such as grease, oil, dried glue, wax, and silicone-based release agents, as these can affect performance.
- Clean and oil the spindle regularly.
- Clean and oil the pressure plate regularly (not with lever version).
- Regularly clean and oil the spindle to maintain smooth operation and prevent wear.
- Clean and oil the pawl regularly (lever version only).