Angle clamps (WSM)
Product details
- Automatic adjustment to work pieces of different thicknesses
- Precise 90° angles
- Service spindle assembly item 3100953 for WSM-9
- Service spindle assembly item 3100954 for WSM-12
= Spare parts available
| Order number | Clamping capacity | Jaw height | Max. passage for mitres | Approx. weight |
| inches | inches | inches | lbs | |
|---|---|---|---|---|
|
WSM-9
|
2 x 7 | 1 3/8 | 3 1/2 | 8.16 |
|
WSM-12
|
2 x 9 1/2 | 2 3/8 | 4 3/4 | 17.2 |
- Metal construction
- Locksmith work
- For clamping angles and mitres
- Use the product only in its original condition.
- Use the product only for its intended purpose. Improper use can cause personal injury or property damage.
- Wear safety goggles to protect your eyes.
- Wear protective gloves to protect your hands.
- Wear safety footwear to protect your feet.
- The handle must always be free of oil and grease to prevent slipping.
- Keep the product out of reach of children.
- Small parts must not be swallowed or inserted into body openings.
- Check the product for damage before each use and make sure that all moving parts are working properly.
- A damaged product must not be used.
- Follow the care instructions for each product – see www.bessey.de.
- Use only original BESSEY spare parts.
- The Clamping tool must not be used for lifting, pulling or leaning.
- The clamping tool must not be used to secure cargo during transportation.
- The clamping tool may only be tightened by hand without any additional aids.
- The clamping tool must not be used for permanent installation.
- Regularly check that the end stop is working properly when using clamps.
- Base body cast steel, galvanised
- Spindle with trapezoidal thread in rolled steel, copper plated
- Heat treated ACME threaded spindle ensures smooth adjustments and high wear resistance
- Clean the rails using a suitable solvent to remove dirt and debris.
- Clean and oil the spindle regularly.