Trigger clamps, one‑hand bar clamps with 360° rotating handle, EHK360
Product details
- The patent-pending 360° rotating trigger handle allows you to position the clamp for optimal comfort and control
- In tight spaces, the handle can be rotated 180° out of the way to fit multiple clamps side-by-side
- A large clamping surface distributes force evenly, while soft-touch removable pads help protect your workpiece
- The ergonomic composite handle is designed for maximum clamping force with enhanced comfort and control
- True one-handed operation makes clamping fast, easy, and efficient
- Converts quickly from clamping to spreading for added versatility
- Delivers 85 to 300 pounds of clamping pressure for strong, reliable performance
- Available in sizes micro to 36”
= Show Spareparts
| Order number | Clamping capacity | Throat depth | Spreading capacity | Clamping force | Approx. weight |
| inches | inches | inches | lbs | lbs | |
|---|---|---|---|---|---|
|
EHK360MICRO
|
4 1/2 | 1 5/8 | 4 - 8 | 85 | 0.23 |
|
EHKM360-06
|
6 | 2 3/8 | 6 - 12 | 165 | 0.9 |
|
EHKM360-12
|
12 | 2 3/8 | 6 - 18 | 165 | 1.06 |
|
EHKL360-06
|
6 | 3 1/8 | 7 3/4 - 12 1/4 | 300 | 1.79 |
|
EHKL360-12
|
12 | 3 1/8 | 7 3/4 - 18 1/4 | 300 | 2.04 |
|
EHKL360-12-SET
|
12 | 3 1/8 | |||
|
EHKL360-18
|
18 | 3 1/8 | 7 3/4 - 24 | 300 | 2.21 |
|
EHKL360-24
|
24 | 3 1/8 | 7 3/4 - 30 | 300 | 2.41 |
|
EHKL360-36
|
36 | 3 1/8 | 7 3/4 - 41 3/4 | 300 | 2.79 |
- Furniture and joinery works
- Kitchen construction and shop fitting
- Staircase construction
- Interior fittings
- Dry construction
- DIY
- One-handed clamping and spreading
- Assembly
- Use the product only in its original condition.
- Use the product only for its intended purpose. Improper use can cause personal injury or property damage.
- Wear safety goggles to protect your eyes.
- Wear protective gloves to protect your hands.
- Wear safety footwear to protect your feet.
- The handle must always be free of oil and grease to prevent slipping.
- Keep the product out of reach of children.
- Small parts must not be swallowed or inserted into body openings.
- Check the product for damage before each use and make sure that all moving parts are working properly.
- A damaged product must not be used.
- Follow the care instructions for each product – see www.bessey.de.
- Use only original BESSEY spare parts.
- The Clamping tool must not be used for lifting, pulling or leaning.
- The clamping tool must not be used to secure cargo during transportation.
- The clamping tool may only be tightened by hand without any additional aids.
- The clamping tool must not be used for permanent installation.
- Regularly check that the end stop is working properly when using clamps.
- Upper and lower section made of reinforced PA6 plastic
- Rail made of hardened steel, burnished
- Lever made of reinforced PA6 plastic
- Plastic protective cap helps prevent surface damage during use
- Regular maintenance is essential to ensure a secure hold and prevent the sliding arm from slipping.
- Clean the rails using a suitable solvent to remove dirt and debris.
- Keep the rail free of contaminants such as grease, oil, dried glue, wax, and silicone-based release agents, as these can affect performance.
- Use a steel brush to clean the rails for optimal grip.